Paragon

Paragon
Production information
Class:	Acclamator I-class assault ship (ACC)
Technical specifications
Length:	752 meters
Beam:	460 meters
Height:	200 meters (with landing gear), 183 meters (in flight)
Max acceleration:	3,500 G
Max speed (space):	3,500 MGLT
Hyperdrive rating:	Class 0.6
Power output:	2 × 1023 W
Armament:	Quad turbolaser cannons (12) Point-defense laser cannons (24) Proton torpedo tubes (4)
Crew:	700
Minimum crew:	300
Passengers:	16,000 infantry and support personnel
Cargo capacity:	200,000 m3 (excluding hangar space and consumables storage)
Usage
Role(s):	Taldryan Carrier
[ Source ]

Ship Info

Dimensions

The 752-meter-long Acclamator I-class assault starwars:transport carried thousands of Republic clone troopers into battle. The Acclamator I favored a wedge or dagger shaped design, like the Republic warships during the Mandalorian Wars, due to its effectiveness—it allowed concentration of firepower while minimizing target profile. This basic design was used in a number of larger craft predating it and would define Imperial ships for decades to come.

Offensive and defensive systems

Acclamator-class assault ships loading troops and taking off.

These ships were armed with 4 heavy torpedo launch tubes; 24 point-defense laser cannons, rated at 6 megatons per shot; and 12 quad turbolaser turrets, each rated at a maximum of 200 gigatons per shot. They were also armed with concussion missiles.

Groups of these ships could perform a "Base Delta Zero", an orbital bombardment that would exterminate all life on the planet. In addition to ground landings, Acclamator-class ships were capable of water landings, as displayed at the Battle of Mon Calamari. The sensor and communications suites were located at the front of the ship's command tower.

The hull armor of Acclamator-class vessels was impregnated with ultra-dispersive neutronium that withstood and spread massive energy blasts. Fusion rockets fired by enemy forces barely made a scratch on the hull as a result.

Complement

Acclamator I-class ships also carried support equipment and vehicles, such as the AT-TE and SPHA walkers, used to provide clone troopers with heavy battlefield support.

Each Acclamator I-class ship held 320 speeder bikes, used by clone troopers for fast battlefield reconnaissance and patrol duties. Eighty LAAT gunships were carried to insert personnel, vehicles, and cargo into battle zones in addition to providing close air support.

Gunships were suspended along an overhead circulating rail in the upper hangar for maintenance procedures during travels. A lower, smaller hangar area was used to embark and disembark ground troops and material when landed. The two levels were connected with elevator platforms. Most of the passenger and barrack decks were located on the upper levels of an Acclamator-class ship.

Propulsion systems

The Acclamator-class's main reactor was located in the middle of the vessel, inside the main superstructure, and was preceded at the frontal half of the ship by multiple fuel tanks. The tanks compressed hypermatter to enormous density for storage. The tanks were connected to the main reactor via pipe assemblies. Secondary reactors were located towards the bow of the vessel.

Front view of an Acclamator I, showing landing gear extended.

The ship's main thrusters were fitted with eight electromagnetic rudders that deflected the exhaust particle streams and gave boost when turning the ship. The secondary thrusters did not provide as much power, but were useful for maneuvering due to being placed further away from the ship's main axis.

The massive fin at the stern of the Acclamator-class contained both the anti-gravity generator and the ship's hyperdrive generator. When landed, the repulsorlift carried much of the ship's weight, but the landing legs maintained a stable contact with the ground.

Bridge

The bridge was located in the middle of an arrow-shaped command tower module that protruded from the dorsal superstructure. This tower module was a standard design for smaller ships in Kuat Drive Yards's starship catalog, which Rothana supplied vessels to. The main bridge and command center had no windows but relied upon advanced holoscreens shaped like the triangular viewports similar to the ones on other Kuat vessels. The bridge crew usually consisted of fully-armored clone pilots manning the control panels, with most operators being seated in twin crew pits below the command officer's area.

History

Taldryan bought one after horizons. Yay us.